SOLO - for furniture doors, drawers and sliding doors

Our SOLO SECONDARY SET is used especially when several drawers and furniture doors are locked or unlocked together.

RFID antenna:
The supplied antenna for RFID cards or RFID key fobs is usually milled into the side from behind.
It is usually operated at a convenient height.
Important: The antenna is inserted into the main lock “SOLO 125”, as only this lock contains the necessary electronics.

Power supply:
The power supply unit supplies up to 5 locks simultaneously.

Wiring:
Each lock has 3 slots on the back.
It does not matter in which slot the transformer, the antenna or the signal line to the SOLO SECONDARYS locks is plugged in.

Cable lengths:
All cables are 1.5m long as standard.
On customer request, we can also produce these cable lengths up to 10m.

Installation in drawers:
The furniture locks are screwed to the rear panel and the supplied locking part to the back of the drawer.
Ensure that the drawer is correctly adjusted before fitting the locking part.

Hinged door installation:
The lock is usually screwed onto the side or top of the cabinet.
The locking part is attached to the door and therefore no cable needs to be laid across the moving parts.

Automatic locking:
All locks are always unlocked together and locked again automatically after 3 seconds.

BOLT function:
With this option, the locks are unlocked with the card and also locked again with the card.
The locks no longer close automatically.
This is very often used in kitchens, offices or stores.