PLUR - Electronic locking of central locking rods

Electronic lock for central anti tilt locking systems
Electronic lock for furniture and lockers

PLUR

The PLUR lock enables the locking of several superimposed drawers with a central locking bar.

It is mounted on the inside of the furniture lid.
For wide drawers, a PLUR SECONDARY lock can be connected with a cable, which then opens at the same time.

Due to the integrated spring, the drawer does not necessarily have to be closed to lock the lock.

The RFID reading range and battery life depend on the technology used and the quality of the keys used (key card, key fob, RFID sticker or wristband). (key card, key fob, RFID sticker or wristband) or battery. or battery.

electronic cabinet lock Datasheet for download

Electronic lock for zentral locking bars

PLUR blum

With the PLUR blum adapter plate PLUR locks can be connected directly to the blum Cabloxx system. The adapter plate is designed so that it is placed flush with the front and sides and screwed together with the lock.

The products differ only by the pre-attached adapter plate.

PLUR 125

  • Opens and locks with the key
  • On request, the lock can also close automatically after 3 seconds
  • Access control for up to 49 keys
  • EM4102/ EM4200 RFID Technology

Accessories

PLUR 13

  • Opens and locks with the key
  • On request, the lock can also close automatically after 3 seconds
  • Mifare ISO 14443A RFID Technology

Accessories

PLUR BT

  • Thanks to Bluetooth technology, the PLUR BT can also be used in metal cabinets.
  • Controllable via the “PSLocks” app or via your own app (interface description)

Accessories

PLUR SECONDARY

The PLUR SECONDARY is a central locking system that can be connected directly to the rear of the PLUR 125, PLUR 13 or PLUR BT and thus enables very wide drawers to be opened simultaneously. The cable length is 1.5 m. Alternatively, any other microprocessor may be used for control.

The following assignment applies to the 1.5 m cable supplied:

  • White – control line, LOW=open, HIGH=close
  • black in the middle: Plus 3 V
  • black outside: minus GNDB

PLUR 3 V / 12 V DC

PLUR 3 V

The PLUR 3 V is operated with a voltage of 2-3 V DC. Usually a changeoverswitch or a relay is used.

Connection:

  • blue– GND / Minus
  • Brown– open
  • black– close

electronic cabinet lock Datasheet for download

PLUR 12 V

The PLUR 12 V is operated with a voltage of 8-16 V DC. Usually a changeoverswitch or a relay is used.

Connection:

  • blue– GND / Minus
  • Brown– open
  • black– close
Close Menu