SOLO - for furniture doors, drawers and sliding doors

SOLO

The SOLO furniture lock is used on doors, drawers and sliding doors and fastened to the respective door or panel on the inside. Not visible from the outside, the SOLO lock is then operated with key cards, key rings, bracelets or mobile phones.

The RFID reading range and battery life depends on the technology used and the quality of the key units (cards, fobs, stickers, bracelets) or battery used.

electronic cabinet lock Download specification file

 

Installation videos:

SOLO 125

  • Access control for up to 49 RFID keys
  • EM4102 / EM4200 RFID technology
  • Software: BOLT (Does not lock automatically, but with the card)
  • Software: GYM (Free choice of lockers)
  • Software: ALARM (An alarm appears if the door is not closed)
Artikel No:FEATURE:Technology:
SOLO 125Furniture lock with trap function, locks automatically after three seconds125 KHz
SOLO 125 +For applications with ALARM or GYM 125 KHz

SOLO 13

  • Access control for up to 49 RFID keys
  • Mifare ISO 14443A RFID Technology
  • Software: BOLT (Does not lock automatically, but with the card)
  • Software: GYM (Free choice of lockers for gyms)
  • Software: ALARM (An alarm appears if the door is not closed)
Artikel No:FEATURE:Technology:
SOLO 13Furniture lock with trap function, locks automatically after three seconds13,56 MHz
SOLO 13 +For applications with ALARM or GYM 13,56 MHz
SOLO 13 EXTFurniture lock with trap function and external antenna13,56 MHz
SOLO 13 EXT +For applications with ALARM or GYM 13,56 MHz

SOLO BT

  • Thanks to Bluetooth technology it can also be used in metal cabinets
  • Controllable with the “PS locks” app or with your own app (interface description)
Artikel No:FEATURE:Technology
SOLO BT+Furniture lock controllable via APPBluetooth

SOLO SECONDARY

Schubladenschloss

The SOLO SECONDARY is plugged directly into the back of the SOLO 125, SOLO 13 or SOLO BT and thus opens at the same time. The cable length is 1.5 m in standard and can also be changed on request. Alternatively, the SOLO SECONDARY can also be controlled by other microprocessors.

For the 1.5 m cable the following occupancy applies:

  • White – control line
    • LOW = open
    • HIGH = close
  • Black center: Plus 3 V
  • Black outside: minus GND
Artikel No:FEATURE:Technology:
SOLO SECONDARY SETLock including 1.5 m cable and spacer plateSECONDARY

SOLO 3 V / 12 V DC

SOLO 3 V

The SOLO 3 V is operated with a voltage of 2-3 V DC and has a cable length of 1.5 m. Usually a double throw switch or a relay is used. 

Connection:

  • Blue – GND / Minus
  • Brown – open
  • Black – close
 

SOLO 12V

The SOLO 12 V is operated with a voltage of 8-16 V DC and has a cable length of 1.5 m. Usually a double throw switch or a relay is used. 

Connection:

  • Blue – GND / Minus
  • Brown – open
  • Black – close
Artikel No:FEATURE:Technology:
SOLO 3VLock with 1.5 m cable3 V DC
SOLO 12VLock with 1.5 m cable12 V DC
SOLO 12V +Lock with 1.5 m cable and "door closed" switch12 V DC
Close Menu